Ever wish that you could tailor your ride-height perfectly?  Have a spring sagging that you now have to replace?  Would you like to have different ride-heights available to you during different times of the year?  You are really going to love me if that's the case, 'cause boy, do I have a solution for YOU!!!  "ACOS™", or Adjustable Coil Over Spacers.  A very nicely built unit that will eliminate the problems associated with trying to make your Jeep level.  Add a stereo to the back and weighing it down?  Add or remove a heavy front bumper?  No trouble!  Within a few moments you can have your Jeep back to level without removing springs and using compressors.  Check it out:

•  

• USEFUL when making future plans for heavy bumpers and/or winches (typically adding 100lb+)

• Can be installed with just a few tools: installation is no more difficult than a Budget Boost

• Available for the front and rear springs on ZJs and TJs, and the front coils of XJ.

• Adjustable in just minutes from 1.25" to 3.00” (recommended maximum) of lift.

• Compensate for sagging coil springs, which will invariably sag over time

• Adjust to compensate for uneven spring heights from side to side.

•  Ultimate add-on lift for those who don't want to swap out springs.

• Extremely simple to install and looks SLICK as hell!

• Install instructions for spring spacer lifts HERE

• Install instructions for ACOS spacers HERE

NOTE: At this time we don't have any way to modify these spacers to work on the WJ, but we are working toward a solution.  We will post info as soon as we know how we are going to pull it off.