Is your JK lifted but still using the OE trackbar? Experiencing front end shimmy or outright Death Wobble? You need the JKS Jeep JK Wrangler Adjustable Front Track Bar!
The trackbar controls lateral movement of the axle housing. It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel. Unfortunately, the fixed length of the OE track bar won’t accommodate ride height adjustments. Changing the distance between mounting points forces the axle housing out of alignment with the rest of the vehicle. Unless corrected, this condition will place unnecessary stress on related suspension and steering components, create alignment problems, and prevent proper suspension & swaybar disconnect operation.
The Jeep JK Wrangler Adjustable Front Track Bar is used in our JK Death Wobble Cure package and is an essential upgrade to any lifted Jeep. Our adjustable track bar is compatible with just about any suspension system and the length is easily adjustable, allowing users to position the axle in 1/16″ increments for extremely precise control and constant changes as vehicle modifications require.
Each end of the adjustable track bar features a Johnny Joint® spherical (2.0″ or 2.5″), Dura-Thane™ performance polyurethane or OE rubber bushing specifically chosen for each application’s requirements. This provides maximum off-road performance while minimizing the transfer of vibrations and road noise.
Our track bar is manufactured to be super beefy; 1-1/2″ thick with a 3/8″ thick steel wall, bent to OE specifications for proper geometry and clearance, and plated with zinc and powdercoat finish provide excellent protection from trail debris and corrosion. The Robust threaded design properly aligns axle housing, perfectly centering it beneath the chassis on coil sprung Jeeps, to prevent undue stress on related components.
Note: Requires 1″ to 6″ of suspension lift. Not compatible with right hand drive vehicles, or frame-mounted track bar drop brackets.
If you desire the ultimate in Death Wobble resistance, we recommend upgrading to our SuperDurometer Bushing, Sleeve, and 9/16″ Grade 8 Bolt kit. KOR-1189-S-KIT
You may also be interested in:
The Jeep JK Wrangler was built from 2007 to Present.
For more info on the JK, here is a great article on Wikipedia.