Looking to upgrade your JK’s OE rear track bar? Check out the Jeep JK Wrangler Adjustable Rear Track Bar from JKS!
The trackbar controls lateral movement of the axle housing. It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel. Unfortunately, the fixed length of the OE track bar won’t accommodate ride height adjustments. Changing the distance between mounting points forces the axle housing out of alignment with the rest of the vehicle. Unless corrected, this condition will place unnecessary stress on related suspension components.
This rear track bar is the perfect companion piece to our adjustable front track bar. Both track bars are compatible with just about any suspension system and the length is easily adjustable, allowing users to position the axle in 1/16″ increments for extremely precise control and constant changes as vehicle modifications require.
Each end of the adjustable rear track bar features a Johnny Joint® spherical (2.0″ or 2.5″), Dura-Thane™ performance polyurethane or OE rubber bushing specifically chosen for each application’s requirements. This provides maximum off-road performance while minimizing the transfer of vibrations and road noise.
Our track bar is manufactured to be super beefy; 1-1/2″ thick with a 3/8″ thick steel wall, bent to OE specifications for proper geometry and clearance, and plated with zinc and powdercoat finish provide excellent protection from trail debris and corrosion. The Robust threaded design properly aligns axle housing, perfectly centering it beneath the chassis on coil sprung Jeeps, to prevent undue stress on related components.
Jeep JK Wrangler Adjustable Rear Track Bar Features
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Premium grade rubber bushings ensure long-lasting comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
Compatible with 0 to 6″ suspension lift. Rear Track Bar Brace is strongly recommended to reinforce weak factory mount on axle. Not compatible with right hand drive vehicles.
You may also be interested in:
The Jeep JK Wrangler was built from 2007 to Present.
For more info on the JK, here is a great article on Wikipedia.