The 2007+ Jeep Wrangler (JK), is an improvement over previous models, however it does have it’s faults. The inadequate bracing of the factory track bar brackets is just one particularly troublesome problem. A startling number of Jeeps, both modified as well as stock, have been disabled on the trail when the factory track bar bracket separated from the axle housing. JK owners have reported this problem on both the front and rear axle housings. Our Jeep JK Wrangler Front Track Bar Brace is a highly effective and economical solution this problem.
JKS Manufacturing has developed an ingenious product to eliminate this threat. This front track bar brace welds directly to the factory bracket and axle housing at multiple points, providing an extremely strong and permanent reinforcement, ensuring your track bar mount will never fail. As an additional benefit, the brace relocates the steering damper to a more effective position that improves clearance, protecting the damper from impacts while off road. A secondary mounting location for the track bar is also provided to accommodate high-clearance steering conversions.
When combined with the Jeep JK Wrangler rear track bar brace, JK owners can take comfort in knowing that both track bar mounts are solid, safe and secure. Of course, these products should always be installed before damage occurs to the factory brackets. Waiting for failure to occur is far more difficult and expensive to repair, not to mention dangerous if you’re miles from home.
You may also be interested in:
The Jeep JK Wrangler was built from 2007 to Present.
For more info on the JK, here is a great article on Wikipedia.