Check out our Jeep JK Wrangler Front Winch Bumpers, built by Hanson Offroad! This stout design is handcrafted from 3/16” cold-rolled steel, providing maximum wheel clearance, optimum approach and departure angles, and front-end protection. The multiple angles and 2" dropped winch deck combine to give better airflow to the radiator, provide a lower center of gravity, and superior bumper strength. The 1” wide clevis tabs are designed and placed so they don't interfere with approach and departure angles, while allowing them to be pulled from any angle without fear of damage to bumper or tab. The tabs are drilled for a 7/8” pin. The bumper is finished in a black semi-gloss powder coat, and provides accommodation for factory or after market driving lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. NOTE: Fairlead Mount Plate, Fairlead, Winch, Off-Road Lights, Recovery Shackles and straps are NOT included with the bumper.
Purchase Jeep JK Wrangler Front Winch Bumpers
The shorter width of this bumper provides full tire exposure for maximum approach angles.
Purchase Stubby Bumper JKSL1102-P
The width of this midsize bumper extends to about the middle of the fender. Purchase Medium Bumper JKML1102-P
The width of this midsize bumper extends to about the middle of the fender, and provides additional protection for the winch.
Purchase Winch Guard Bumper JKML1202-P
The width of this midsize bumper extends to about the middle of the fender, and provides additional protection for the winch, grill, and fenders.
Purchase Fender Bar Bumper JKML1302-P
You may also be interested in: Jeep JK Wrangler Death Wobble Cure Package Jeep JK Wrangler Front Track Bar Brace Jeep JK Wrangler Rear Track Bar Brace Jeep JK Wrangler Adjustable Front Track Bar Jeep JK Wrangler Heavy Duty Tie Rod Jeep JK Wrangler Steering Stabilizer Relocation Bracket The Jeep JK Wrangler was built from 2007 to Present. For more info on the JK, here is a great article on Wikipedia.