ZJ Grand Cherokee Bumpers - Hard-KOR Front and Rear

(If you have questions or a comment... post it below, and we'll answer you ASAP!)

Have you been looking for a unique set of bumpers for your ZJ Grand Cherokee? We have what might possibly be the best Grand Cherokee bumpers on the market. I don't say that to brag.  I have actually beat both the ZJ tube-type prerunner-style bumper AND the plate steel ZJ Stealth-style bumper mercilessly on the rocks over the last five years, and have had no issues whatsoever, other than scratched powdercoating.

These ZJ bumpers are built to the Extreme: rock-bashable, high-clearance, and the fronts allows the mounting of a winch. Protect the front and rear of your Grand Cherokee from a disaster with a rock or tree today. Our ZJ Grand Cherokee bumpers are CAD designed for us, are bent out of THICK 3/16" plate steel, (which is 50% thicker than most bumpers on the market), built with some of the best machinery available on the market. They are mounted with the VERY BEST mounting system available, which sandwiches the weak unibody framerails on top and bottom, rather than how other aftermarket bumpers are made, mostly to reduce cost, I expect.

We keep the weight down, too: 100lbs average, and even holds a 15k rated winch.

Shipping is via Truck Freight (too large to go via UPS), and ranges from $125 to $250 depending on how close to Phoenix, AZ you are. We'd rather ship to your business, as there is a $70 residential surcharge if you have us ship it to a house rather than a zoned-business address.

Light tabs can be drilled and mounted in the front section, but is discouraged due to the turbulence the lights will create, possibly causing your Jeep to overheat in some instances.

A note from Kevin about front and rear bumpers and rear tire carrier design.

When deciding on a Grand Cherokee bumper for your Jeep ZJ make sure that you take into account some of the unforeseen issues.

1) Does the tire carrier hold the tire in a way to reduce blind spots and maximize visibility out the rear? Our carrier mounts on the driver's side, in your natural blind-spot, so that you can see both over your right shoulder AND still see out the rear view mirror, which is mostly impossible with nearly all other Grand Cherokee tire carriers on the market who put the carrier in the middle or to the right of the rear window.

2) How is the tire carrier mounted? Can it withstand a washboard road with the weight of a 35" tire on a steel wheel mounted on it? That's up to 150lbs in some cases.just rattling around back there on the bumper! Our tire carrier uses a patented cam-latch, which utilizes an easy-to-open lever which puts constant tension on the latch and hasp assembly which completely eliminates rattles from your carrier. And, you can actually lift the entire rear end of the Jeep off the ground with a forklift from OUR tire carrier. how's that for strong?

3) What sort of hinge is included? Our ZJ bumper uses twin 3/4" Heim joints, which not only has over 12,000 lbs. of radial load capability EACH (there are two.that's 24,000 lbs. total), but are also easily replaceable if they wear over time, and you are also able to fine-tune the height of the carrier up and down by threading the heim joint in and out. Also, you can completely remove the carrier from the bumper very easily if you wanted to.

4) Our bumpers are built with 1/4" ultra-thick steel plate in the center sections (between the frame mounts for added rigidity) and 3/16" thick steel plate everywhere else, which is more than 50% thicker than the more well-known brands of bumper. Have you ever seen a (well-known brand) front Grand Cherokee winch bumper BEND IN THE CENTER during a heavy winch pull? I have, with my own eyes, and that's why we use 1/4" and 3/16" steel with fortified 3/8" thick frame rail mounts. This bumper ain't going ANYWHERE once you mount it up, winch or no.

5) Our ZJ Grand bumpers allow for the best approach angle and departure angle currently available in ANY aftermarket Grand Cherokee bumper manufacturer, 'cause that's how we roll, playa.

6) Our winch is inserted inside the front bumper, all the way down, so as to not give you overheating problems like some of the other aftermarket bumpers have been known to cause.

D-ring tabs for the stealth ZJ bumper are a $45.97 upgrade, and I highly recommend them.

Also available are our Pre-Runner Style bumpers, which are nearly as beefy, but are a tad lighter. Click on the images below for a larger photo.

S/H costs: By Truck Freight only. A business with a loading dock is $60~$80 cheaper than a residence.

THINK IN BULK: Buying two bumpers at once reduces your shipping cost by around 40%.

Two bumpers on a pallet only costs about 20% more than a single bumper on a pallet to the same zip code!


Krylon spray paint works well, and so does POR-15. Even if you decide you want professional painting or powdercoating, you can probably have the bumpers powdercoated AFTER they arrive locally for less than I can charge you to do them. Do some price comparisons before ordering. Just trying to save you some money.


For Frequently Asked Questions (FAQ) about specific details on our bumpers, click HERE

(all bumpers fit 1993, 1994, 1995, 1996, 1997, and 1998 ZJ Grand Cherokees)

HARD-KOR Stealth Front Bumper for ZJ model Jeep Grand Cherokees

HARD-KOR Stealth Rear Bumper for ZJ model Jeep Grand Cherokees

Tube-Style Front PreRunner Bumper for ZJ model Jeep Grand Cherokees

Tube-Style Rear PreRunner Bumper for ZJ model Jeep Grand Cherokees

Older Post
Newer Post


  • i have a 95 zj..im wanting to buy your 7 in long arm kit..what all will i need along with this kit to make it complete ,i plan on running 35s..or is it ready to bolt on and go..thanx

    tom hagan
  • Hello
    I am interested in the bumper, I have a great jeep Cherokee ZJ 1993.
    Is what you deliver in France?
    Can you give me the price of bumper with transportation and customs clearance.

    Mr Renaud JAMIS

  • Hey there, Joe. No problem at all…we can definitely get you taken
    care of. The price of the retrofit rear tire carrier swing, with all
    the hinges, brackets, and hardware that you need in order to retrofit
    your bumper, is going to be $293 plus shipping of maybe $30 or so,
    depending on where you’re located.

    You will, indeed, have to use the license plate relocation setup. A 33
    inch tire is too large to NOT obstruct the license plate, unless you
    move the plate all the way to the right in the license plate slot,
    which the police may or may not recognize as “legal”. Here’s a link to
    it: http://www.kevinsoffroad.com/cart/index.php?main_page=index&cPath=47_61

    Thank you for your keeping small businesses like ours IN business!

    Very Gratefully,
    Kevin, Rob, Will, Jim, Bob, Cesar, Kim, Lori, Ally, and the rest of the KOR
    Support Krew


Leave a comment

Please note, comments must be approved before they are published

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Shopping Cart

Your cart is currently empty.
Shop now