JK Death Wobble Package 0"-6" lift: Jeep Wrangler JK Models
JK Wrangler Death Wobble Package; 0"-6" of Lift
(If you've not seen our write-up on Death Wobble, please read that first to understand better of what's going on under your Jeep when the front end begins shaking after you hit a bump with the right front tire.)
This is our most popular and effective Death Wobble cure package for your JK Wrangler. These parts, properly installed on your JK Wrangler AT THE SAME TIME, will give you somewhere around an 80%-95% chance of curing your case of Death Wobble COMPLETELY. We've been experimenting with and learning about the root causes of Death Wobble since 1999, and have experience that VERY few other shops possess. In fact, we get calls for help from other 4x4 shops, and auto mechanics from all over, requesting our help and proven replacement parts to solve their customers Death Wobble problems. We are the most well-known source, so I feel very comfortable in recommending these parts together as a package, not only because of our experience in curing literally hundreds of Death Wobble problems for over 10 years now, but because few shops know as much about Death Wobble as we do.
In fact, we have invented several products SPECIFICALLY designed to cure Death Wobble and reduce the "play" in the front end of the JK Wrangler. Fortunately, the JK Wrangler Death Wobble cases are easy to cure with the correct parts. This package includes ALL the following items that we recommend people purchase and install TOGETHER when they are having Death Wobble problems. These items are also available separately if you already own one or more of these components.
KOR-1199 Super Durometer Bushings, upper and lower
JKS-121 Super-Beef 1-1/2" thick Adjustable Track Bar (fits JKs with 0">6" of lift, and the thickest track bar on the market!)
KOR-1109 x 2 Special Polyurethane Bushing Lubricant Tubes
KOR-9906-HW New 9/16" Grade 8 Bolts, Lock Nuts, and Thick Sleeves
OGS-162 Steering Stabilizer Relocation Bracket
KOR-9309 Hard-KOR Steering Stabilzer
(OGS-924 Steering Stabilizer Tie Rod Bracket is not necessary in most cases. Instructions for the JKS OGS-162 bracket state that it is mandatory. The factory tie rod mount will rotate enough to facilitate proper installation)
(Please note that the factory bushings will need to be pressed out of the JKS track bar and our SuperDurometer bushings will need to be pressed in.)
Death Wobble can be triggered by MANY different front end components and alignment settings, so be aware that there is STILL a small chance you may need more assistance after these components are installed. If so, don't hesitate to give us a call, and we'll talk you though getting this problem solved once and for all. I have searched long and hard to find what components work, and it's now available to you to cure YOUR Death Wobble problem.
Don't delay your fix. Get it handled today, and get your Jeep back to driving safely down the highway once again.
All products in this kit are proudly American-Made, except the steering stabilizer, which is imported. Unfortunately, it's almost impossible these days to find a US-Made steering stabilizer, but we're still looking!