Ford Expedition (1996+) Install Guides — Steering Stabilizer Install Guide

Steering Stabilizer Install Guide

Click here for PDF First, you need to remove the stock stabilizer bolt that goes through the tie rod by removing the nut holding that bolt in, then, with a tie rod end puller that you can rent from AutoZone, slowly press the bolt out. The stock stabilizer will follow, as it's one piece. Next, remove the axle side bolt on the other side of the stock stabilizer. For installation, install the included tapered bolt through the tie rod from front. You’ll need a lock washer on the back side, and a nut. After the bolt is tight in the...

Read more →