Sway Bar Measuring Tape - How To Measure a Sway Bar
Various Jeeps come with different sized anti-sway bars from the factory, based on whether or not it came with a Tow Package, UpCountry or OffRoad Package, or if the previous owner upgraded or changed something before you purchased it. I found a handy measuring tape on Energy Suspension's website, which will help you figure out what size bars you have front and rear, and I wanted to make available to you here so that you know what bushings to purchase.
We carry quite a few Energy Suspension Greaseable sway bar bushings, so if you can't find what you're looking for, let us know, and we'll see if we can get a hold of it for you. Simply print out the Sway Bar Measuring Tape PDF Sway Bar Measuring Tape, cut it out, and wrap it around your anti-sway bar to see what it measures out at. If the metric scale doesn't perfectly line up, try the standard scale, and see which one is closer. You're going to want to err on the side of a bushings that's too small by half a millimeter, than too large by half a millimeter, because sometimes it's not 100% obvious how big it is, as it'll sit between the hash marks.
Do your best work, check both tape measures, and let us know what size you need!
QUESTIONS? POST THEM HERE:
5 comments
This site can’t be reached
The webpage at https://kevinsoffroad.com/wp-content/uploads/2012/05/2010-energy-suspension-measuring-tape.pdf might be temporarily down or it may have moved permanently to a new web address.
ERR_INVALID_RESPONSE
Brandon:
Depending on who replaced what with what parts under your Jeep, yes, the kit is complete, unless you don’t already have flat bushings like these for your sway bar. We’ve had a very positive response on these kits…so yeah…it could be all you need.
Ya i was trying to find out if i buy the death wobble kit for a 97 xj is there any thing else i have to buy or is everything included and does this seem to get the proablem solved