**This page is no longer in use! Please visit new page here: http://www.kevinsoffroad.com/cart/bumpers-amp-recovery-bumpers-recovery-grand-cherokee-zj-19931998-c-47_57/
Have you been looking for a unique set of bumpers for your ZJ Grand Cherokee? We have what might possibly be the best Grand Cherokee bumpers on the market. I don't say that to brag...I have actually beat both the ZJ tube-type prerunner-style bumper AND the plate steel ZJ Stealth-style bumper mercilessly on the rocks over the last five years, and have had no issues whatsoever, other than scratched powdercoating.
These ZJ Grand Cherokee bumpers are built
to the Extreme: rock-bashable, high-clearance, and
the fronts allows the mounting of a winch. Protect the front and rear of your
Grand Cherokee from a
disaster with a rock or tree today. Our ZJ Grand Cherokee
bumpers are CAD designed
for us, are bent out of THICK 3/16" plate steel, (which is 50% thicker
than most bumpers on the market), built with some of the best
machinery available on the market. They are mounted
with the VERY BEST mounting system available, which sandwiches
the weak unibody framerails on top and bottom, rather than how
other aftermarket bumpers are made, mostly to reduce cost, I
expect.
We keep the weight
down, too: 100lbs average, and even holds a 15k rated winch.
Shipping is via Truck
Freight (too large to go via UPS), and ranges from $125 to $250 depending on how close
to Phoenix, AZ you are. We'd rather ship to your business,
as there is a $70 residential
surcharge if you have us ship it to a house rather than a
zoned-business address.
Light tabs can be drilled and
mounted in the front section, but is discouraged due to
the turbulence the lights will create, possibly causing your Jeep to overheat in
some instances.
|
A note from Kevin about front and rear bumpers and rear tire carrier design...When deciding on a Grand Cherokee bumper for your Jeep ZJ make sure that you take into account some of the unforeseen issues. 1)
Does the
tire carrier hold the tire in a way to reduce blind spots
and maximize visibility out the rear? Our carrier mounts on the driver's side, in your natural blind-spo t,
so that you can see both over your right shoulder AND still
see out the rear view mirror, which is mostly impossible
with nearly all other Grand Cherokee tire carriers on the market who put the
carrier in the middle or to the right of the rear window.
2)
How is the tire carrier mounted? Can it withstand a
washboard road with the weight of a 35" tire on a steel
wheel mounted on it? That's up to 150lbs in some
cases...just rattling around back there on the bumper! Our tire carrier uses a patented
cam-latch,
which utilizes an easy-to-open lever which puts constant
tension on the latch and hasp assembly which completely
eliminates rattles from
your carrier. And, you can
actually lift the entire rear end of the Jeep off the ground
with a forklift from OUR tire carrier...how's that for
strong?
 3) What
sort of hinge is included? Our ZJ bumper uses twin 3/4" Heim joints, which not only has over 12,000 lbs. of radial load
capability EACH (there are two...that's 24,000 lbs. total),
but are also easily replaceable if they wear over time, and
you are also able to fine-tune the height of the carrier up and down
by threading the heim joint in and out. Also, you can
completely remove the carrier from the bumper very easily if
you wanted to.
4)
Our bumpers are built with 1/4" ultra-thick steel plate in
the center sections (between the frame mounts for added
rigidity) and 3/16" thick steel plate everywhere else, which is
more than 50% thicker than the more well-known brands of
bumper. Have you ever seen a (well-known brand) front
Grand Cherokee winch
bumper BEND IN THE CENTER during a heavy winch pull? I
have, with my own eyes, and that's why we use 1/4" and 3/16" steel with fortified
3/8" thick frame
rail mounts. This bumper ain't going ANYWHERE once you
mount it up, winch or no.
 5)
Our ZJ Grand bumpers allow for the
best approach angle and departure angle currently available
in ANY aftermarket Grand Cherokee bumper manufacturer,
'cause that's how we roll, playa.
 6)
Our winch is inserted inside the front
bumper, all the
way down, so as to
not give you overheating problems like some of the other
aftermarket bumpers have been known to cause.
|
D-ring tabs for the stealth ZJ
bumper are a $45.97 upgrade, and I highly recommend them.
Also available are our
Pre-Runner Style bumpers, which are nearly as beefy, but are a
tad lighter. Click on the images below for a larger photo.
Install Instructions HERE
|
S/H costs: By Truck Freight only. A business with a loading dock is $60~$80 cheaper than a residence.THINK IN BULK: Buying two bumpers at once reduces your shipping cost by around 40%.Two bumpers on a pallet only costs about 20% more than a single bumper on a pallet to the same zip code!ALL BUMPERS COME NON-POWDERCOATED. Krylon spray paint works well, and so does POR-15. Even if you decide you want professional painting or powdercoating, you can probably have the bumpers powdercoated AFTER they arrive locally for less than I can charge you to do them. Do some price comparisons before ordering. Just trying to save you some money.-Kevin- |
|
HARD-KOR Stealth Front Bumper for ZJ model Jeep Grand Cherokees |
|
|
|
HARD-KOR Stealth Rear Bumper
for ZJ model Jeep Grand CherokeesTube-Style Front PreRunner Bumper
for ZJ model Jeep Grand CherokeesTube-Style Rear PreRunner Bumper
for ZJ model Jeep Grand Cherokeestd width="323" align="center" style="font-family: Arial">
All '93>'98 Grand
Cherokees Pre-Runner rear with tire
carrier
$862.97
Click Here To Go To Shopping Cart
All '93>'98 Grand
Cherokees Pre-Runner rear w/o tire
carrier
$588.97
Click Here To Go To Shopping Cart
|
All information provided herein � 2010 KevinsOffroad.com. All rights reserved. "Jeep" is a registered trademark of the Chrysler Company. |
2 comments
Grand Cherokee Bumpers for 1993>1998 ZJ Grand Cherokees http://t.co/4iZBIrqM
How much does the bumper cost? And how much doe it cost to be shipped to terre haute indiana?