... ... KevinsOffroad.com | Death Wobble Experts | Upgraded Factory Parts | 20 – Tagged "Jeep Wrangler JK" – KevinsOffroad.com / Overland-Ready.com

KevinsOffroad.com | Death Wobble Experts | Upgraded Factory Parts | 20+ Years of Experience, Info, and Knowledge — Jeep Wrangler JK

Jeep Wheel Spacers JK, WJ, WK, WK2, & XK

Have you put taller tires on your Jeep to get extra ground clearance, only to find that your new tires now rub on your control arms and body panels?  If so, then you need our Jeep Wheel Spacers! These 6061T6 aluminum spacers are 1.5” thick, set to a 5 on 5" bolt pattern, and in addition, each wheel spacer is wheel and hub centric for a perfect fit.  These wheel spacers are an easy way of pushing out your taller front tires to keep them from rubbing on your control arms and body panels during turns.  Add them to your rear wheels to keep them in...

Read more →

Jeep JK Wrangler Front Track Bar Brace

The 2007+ Jeep Wrangler (JK), is an improvement over previous models, however it does have it's faults.  The inadequate bracing of the factory track bar brackets is just one particularly troublesome problem.  A startling number of Jeeps, both modified as well as stock, have been disabled on the trail when the factory track bar bracket separated from the axle housing.  JK owners have reported this problem on both the front and rear axle housings.  Our Jeep JK Wrangler Front Track Bar Brace is a highly effective and economical...

Read more →

Jeep JK Wrangler Adjustable Front Track Bar

Is your JK lifted but still using the OE trackbar?  Experiencing front end shimmy or outright Death Wobble?  You need the JKS Jeep JK Wrangler Adjustable Front Track Bar! The trackbar controls lateral movement of the axle housing.  It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel.  Unfortunately, the fixed length of the OE...

Read more →

Jeep JK Wrangler Front Winch Bumpers - Hanson

Check out our Jeep JK Wrangler Front Winch Bumpers, built by Hanson Offroad!  This stout design is handcrafted from 3/16” cold-rolled steel, providing maximum wheel clearance, optimum approach and departure angles, and front-end protection.  The multiple angles and 2" dropped winch deck combine to give better airflow to the radiator, provide a lower center of gravity, and superior bumper 

Read more →

Jeep JK Wrangler Heavy Duty Tie Rod 2007-2018

Have you bent your JK's stock tie rod?  Tired of smacking it on rocks and other trail obstacles?  We've come up with yet another creative solution for you, with parts you simply can't find anywhere else. 

Check out our Hard-KOR Jeep JK Wrangler Heavy Duty Tie Rod! The design...

Read more →