If you've ever wished that you could tailor your ride-height perfectly on your Cherokee, Wrangler, or Grand Cherokee, ACOS spacers are your solution. Have a spring sagging that you now have to replace? Would you like to have different ride-heights available to you during different times of the year? You are really going to love me if that's the case, 'cause boy, do I have a solution for YOU!!! "ACOS™", or Adjustable Coil Over Spacers by JKS Manufacturing. A very nicely built unit that will eliminate the problems associated with trying to make your Jeep level. Add a stereo to the back and weighing it down? Add or remove a heavy front bumper? No trouble! Within a few moments you can have your Jeep back to level without removing springs and using compressors.
Check it out:
-
USEFUL when making future plans for heavy bumpers and/or winches (typically adding 100lb+)
-
Can be installed with just a few tools: installation is no more difficult than a Budget Boost
-
Available for the front and rear springs on ZJs and TJs, and the front coils of XJ.
-
Adjustable in just minutes from 1.25" to 3.00” (recommended maximum) of lift.
-
Compensate for sagging coil springs, which will invariably sag over time
-
Adjust to compensate for uneven spring heights from side to side.
-
Ultimate add-on lift for those who don't want to swap out springs.
-
Extremely simple to install and looks SLICK as hell!
Install instructions for spring spacer lifts HERE
Install instructions for ACOS spacers HERE
NOTE: At this time we don't have any way to modify these spacers to work on the WJ, but we are working toward a solution. We will post info as soon as we know how we are going to pull it off.
*Free shipping to the 48 states
Adjustable Coil Spring Spacers for TJ Wrangler, JK Wrangler,ZJ Grand Cherokee, and XJ Cherokees |
|
|
|
IMPORTANT NOTE: ADDING LIFT TO YOUR JEEP REQUIRES ADJUSTMENT TO ADDITIONAL COMPONENTS TO MAKE IT SAFE. CONSULT YOUR INSTALLER FOR YOUR SPECIFIC NEEDS. **ZJ Rear ACOS Installers: We have had an issue with the rear UpCountry springs being wrapped slightly too tight to go over the ACOS threaded post. You can easily clearance the spring with a Dremel tool, or just simply removing a small portion of the "pig-tail" from the top of the spring with a right-angle grinder or saw. This ONLY affects the rear UpCountry springs, so far as we can tell. -Kevin- |